How To Set The Comment On The 1500E

The 1500E can be set to print a pre-programmed comment. By default, it prints month, date, hour and minutes. For comments, the print order must be changed. To set the comment:

1. Remove the top cover.
2. Press SELECT. If a password is set on the 1500E, the time recorder will display 99 99.
3. Enter the password. The password is required to access the settings. If it is unknown, the time recorder must be reset. To enter the password:
   • Press CHANGE to enter the first two numbers of the password.
   • Press SET.
   • Press CHANGE to enter the second two numbers of the password.
   • Press SET
4. Press SELECT to position the Indicator Mark under COMMENT.
5. Press CHANGE to select the comment:

6. Press SET to save the change.
7. Press SET again to exit the programming mode.

When completed, the 1500E should return to the normal display.