The 1000E can be configured to print in a different order. By default, the unti prints the month, date, hour and minutes. To set the print order:
- Remove the top cover.
- Press Select. If a password is set, the time recorder will display 99 99.
- Enter the password. The password is required to access the settings. If it is unknown, the time recorder must be reset. To enter the password:
- Press CHANGE to enter the first two numbers of the password.
- Press SET.
- Press CHANGE to enter the second two numbers of the password.
- Press SET
- Press Select to move the indicator mark under PRINT ORDER.
- Press CHANGE to select the desired print order:
|
1 |
Month, Day, Hour, Minute |
10 |
Month, Day |
|
2 |
Day, Month, Hour, Minute |
11 |
Day Of The Week, Day, Month, Year |
|
3 |
Month, Day, Year, Hour, Minute |
12 |
Comment, Month, Day, Year |
|
4 |
Day, Month, Year, Hour, Minute |
13 |
Comment, Day, Month, Year |
|
5 |
Year, Month, Day, Hour, Minute |
14 |
Comment, Year, Month, Day |
|
6 |
Year, Month, Day, Hour, Minute, Second |
15 |
Month, Day, Year, Comment |
|
7 |
Day, Hour, Minute |
16 |
Day, Month, Year, Comment |
|
8 |
Day Of The Week, Day, Hour, Minute |
17 |
Year, Month, Day, Comment |
|
9 |
Year, Month, Day |
18 |
Comment, Day, Hour, Minute |
- Press SET to save the change.
- Press SET again to exit the programming mode.
When completed, the 1000E should return to the normal display.
Comments
0 comments
Article is closed for comments.