How To Set The Comment On The 900E

The 900E can be setup to print a pre-programmed comment. By default, the print order is set to print the month, date, hour and minutes. For pre-programmed comments, the print order must be set to include a pre-programmed comment. To set the comment:

1. Remove the top cover.
2. Press SELECT. If a password is set on the unit, the time recorder will display 99 99.
3. Enter the password. The password is required to access the settings. If it is unknown, the time recorder must be reset. To enter the password:
   
   
   
   • Press CHANGE to enter the first two numbers of the password.
   • Press SET.
   • Press CHANGE to enter the second two numbers of the password.
   • Press SET
4. Press SELECT to move the Indicator under COMMENT.
5. Press CHANGE to select the comment:

6. Press SET to save the changes.
7. Press SET again to exit the Programming Mode.

When completed, the 900E should return to the normal display. For further assistance, contact our Technical Support Department at 404-691-1064.