If the 900E displays E-40 when trying to change a setting, such as the date, time or daylight saving time settings, the means a password has been set on the 900E. In order to access the programming, the password must be entered. To enter the password:
- Press SELECT.
- Press CHANGE to enter the first two numbers of the password.
- Press SET to save the change.
- Press CHANGE to enter the second two numbers of the password.
- Press SET to save the change.
After the password is entered, settings can be changed, as needed. If the Password is unknown, the unit must be reset. The password cannot be bypassed. For further assistance, contact our Technical Support Department at 404-691-1064.
Comments
0 comments
Article is closed for comments.