Setting a password is a security feature that prevents unauthorized changes to the settings on the 900E. Once the password is set, it should be noted for essential personnel to access the programming. To set a password:
- Insert the key into the Top Cover and turn it 1/4 turn to unlock the cover.
- By holding the left and right sides, lift the Top Cover up.
- Press Select.
- If 99 99appears, enter the password. The password is required to access the settings. If the password is unknown, the time recorder must be reset. To enter the password:
- Press CHANGE to enter the first two numbers of the password.
- Press SET.
- Press CHANGE to enter the second two numbers of the password.
- Press SET
- Press SELECT until the Indicator is over PASSWORD.
- Press CHANGE to select the first two digits of the password.
- Press SET to save the change.
- Press CHANGE to select the second two digits of the password.
- Press SET to save the change.
- Press SET again to exit the Programming Mode.
Comments
0 comments
Article is closed for comments.