When calibrating the 800P, the unit could constantly reset. This occurs when the unit is being incorrectly calibrated for the Tru-Alignment threshold with the same number was set for minimum and maximum alignment value. To correct the problem:
- Press the the Plus (+), Minus (-) and SET at the same time.
- View the display as it should show rESt for approximately 2 seconds.
- When the clock returns to the normal display, calibrate the Tru-Align feature.
Review the user manual for directions on calibrating the Tru-Align. For further assistance, contact our Technical Support Department at 404-691-1064.
Comments
0 comments
Article is closed for comments.