Summary
You can export the fingerprint and face enrollments from PCTOUCH, PCFACE, and PCPROX with face detection clocks to a USB drive and import them on another clock. You do not need biometric sync to do this, so it is a simple way to copy enrollments between clocks.
Note: The screenshots in this article are from a PCTOUCH (fingerprint) clock. Face clocks follow the same steps with slight differences in what the clock shows.
Before you begin
- Use a USB drive formatted as FAT32, exFAT or NTFS.
- The same drive can be used with PCFACE, PCTOUCH and PCPROX with Face detection. Each model names its backup file differently, so they do not clash.
- If the drive already holds a backup, exporting overwrites it. The clock warns you first. Use a separate drive if you want to keep an older backup.
Find the Biometric Import/Export menu
On the clock, open Settings (enter the administrator PIN if the clock asks), then Support, then Advanced Options, then Biometric Import/Export.
| Support menu: choose Advanced Options | Advanced Options: choose Biometric Import/Export |
Export enrollments to the USB drive
1. Insert the USB drive into the clock that has the enrollments.
2. Open Settings → Support → Advanced Options → Biometric Import/Export.
3. Tap Export.
4. If the clock finds an existing backup on the drive, it asks Are you sure? This will overwrite any existing backups on the storage device. Tap YES to continue. This question only appears when a backup already exists.
5. A progress indicator shows the export status.
6. When the export finishes, a confirmation screen appears. Remove the USB drive.
| Choose Export | Shown only if the drive already holds a backup | Export Complete |
Import enrollments on another clock
1. Insert the same USB drive into the clock you want to copy the enrollments to.
2. Open Settings → Support → Advanced Options → Biometric Import/Export.
3. Tap Import. A progress bar shows the import status.
4. When Import Complete appears, open the employee list. Employees who received an enrollment now show an enrollment icon.
5. Ask an employee to verify to confirm their enrollment works on this clock.
| Before the import: the finger is not found | Import Complete | After the import: enrollment icons |
What an import changes
- It brings over only the enrollments for employees who are on the clock you are importing to.
- If an employee already has enrollments on that clock, the imported ones overwrite them.
- It does not erase anything else: enrollments for employees who were not part of the backup are left alone.
- Example: If John is enrolled on Clock 2 but not on Clock 1, and you back up the enrollments from Clock 1 and import them to Clock 2, John’s enrollment will not be erased or overwritten. Because he was not part of the Clock 1 backup, the import does not touch his enrollment on Clock 2.
Troubleshooting
| Error: USB storage device not found | Make sure the USB drive is inserted and formatted as FAT32, exFAT or NTFS, then try again. |
| An employee is not found after the import | Confirm the employee is on the clock you imported to. Only employees on that clock receive enrollments. |
Error shown when the clock cannot find a usable USB drive
Frequently asked questions
| Do I need biometric sync to use this? | No. USB export and import work without biometric sync. |
| Does the new biometric consent requirement affect enrollments I already have? | No. Enrollments created before the update keep working, including backing them up to a USB drive. |
| Will importing delete enrollments on the destination clock? | No. The only change is that of the enrollments of any employee who is also in the backup. |
Comments
0 comments
Article is closed for comments.