When punching the 1600E Time Clock and punch issues are being experienced, such as jamming on every punch. Please make sure to use the adapter that was shipped with the clock and not any power adapter. Depending on the serial number on the 1600E determines the power adapted to be used with the clock:
- Serial numbers below IE6030001 require adapter (Part Number Q7150-5210) with 15VAC output of 1300mA
- Serial numbers above IE6030001 require DC adapter (Part Number Q7169-52100) with 12VDC output of 3A
If you suspect you could be using the incorrect power adapter, please give our Technical Support Department a call to 404-691-0400.
Comments
0 comments
Article is closed for comments.