Setting up the CT70/72 Terminal to Communicate with PayClock Online

The setup of the CT72 terminal is a two part process. First you must define the CT72 terminal in the PayClock Online software. Then finish the setup at the CT72 terminal itself. Note: Record the serial number from the terminal, this will be used in the setup of the PayClock Online software.

Add the CT72 Terminal in the PayClock Online Software

1. Open PayClock Online and go to the Clocks > Manage Clocks selection.
2. Click the Add Clock option; +New if this will be another clock that will be added.
3. Choose CT72 and click Select.
4. Enter an identifier for the terminal in the Device Nickname field.
5. Enter the serial number from the terminal in the Serial Number field.
6. Click the Settings tab to select the desired Validation Types for the employees to use.
• The available Validation Types are: Allow Badges, Allow PIN Numbers and Allow Fingerprints
7. Click Save.

Setup the communications at the CT72 terminal

 The CT72 series time clock unit has two options for connecting to the network: Wireless or Wired

• WiFi Connection:

1. Connect the power supply to  the CT72 unit.
2. Tap Settings.
3. Enter the Admin PIN and tap OK. Note: The default PIN is 99999.
4. Tap Wireless and select Wi-Fi Networking On if it isn’t already.
5. Select the desired wireless network, the WIFI Passcode screen will display if secured.
6. Tap OK when the passcode has been entered.
7. Tap Sync Now.
8. The clock will connect to PayClock Online, download data and will be ready for use. 

• Wired Connection:

1. Connect the network cable and power supply to the CT72 terminal.
2. Tap Settings.
3. Enter the Admin PIN and tap OK. Note: The default PIN is 99999.
4. Tap Network and verify the clock has an IP address.
   
      º   If using a static IP address: tap DHCP to Off and enter the IP address, Subnet Mask and Gateway for the connection.
5. Tap Sync Now.
6. The clock will connect to PayClock Online, download data and will be ready for use.

For further assistance, contact our Technical Support Department at 404-691-1064.