How To Set The Weekly Payroll Mode On The 7000E

The 7000E can be configured for a Weekly Payroll Mode. In setting the mode, only the total hours are calculated. The 7000E does not separate regular hours from overtime hours. Also, timecards cannot be used to cover more than one pay period. The front side of the card must be full within one pay period before the card can be used on the back for that same period. To set the Weekly Payroll Mode:

1. Insert the key into the Top Cover and turn it 1/4 turn to unlock the cover.
2. By holding the left and right sides, lift the Top Cover up.
3. Press and hold the FUNCTION button for 3 seconds.
4. When the 7000E beeps, release the FUNCTION
5. Press the FUNCTION button to move the Indicator Mark under MODE.
6. Press CHANGE to ser the Payroll Mode to 2.
7. Press SET to save the change.
8. Press the CHANGE to select the day of the week the pay period will start:

9. Press SET.
10. Press SET again to exit the Programming Mode.

When completed, the 7000E should return to the normal display.Changing the Payroll Mode cannot be done if cards are stored in the 7000E's memory. Trying to set or change the Payroll Mode while cards are stored will produce an E-49 Error and an All Cards Reset must be performed.