Resetting Cards For Job Cost Mode On The 7500E

The 7500E can be configured for Job Cost Mode. Only the total hours are calculated. Regular and Overtime hours are not separated. Also, the timecards cannot be used to cover more than one pay period. In Job Cost Mode, timecards must be manually reset. To reset cards:

1. Before inserting a card into the 7500E, press the RESET button.

The Reset button with the cover on the unit is the forth button from the left on the panel. With the cover off, it would be the SET button.

2. Insert a timecard to reset to allow the unit to print RESET on the last line of the card.

If a punch is needed to complete a line on the card, the 7500E will finish the totals for that line then eject the card. The card must be reinserted to get RESET printed on the card.

Articles in this section

Comments

Articles in this section

Related articles