How To Set The Weekly Payroll Mode On The 7500E

The 7500E can be configured for a Weekly Payroll Mode. In setting the mode, only the total hours are calculated. It does not separate regular hours from overtime hours. Also, the timecards cannot be used to cover more than one pay period. The front side of the card must be full within one pay period before the back can be used. To set the weekly payroll mode:

1. Remove the top cover.
2. Press and hold the FUNCTION button for 3 seconds.
3. When the 7500E beeps, release the FUNCTION
4. Press the FUNCTION button to move the Indicator Mark under MODE.
5. Press CHANGE to select the Payroll Mode to 2 for Weekly.
6. Press SET to save the change.
7. Press the CHANGE to select the day of the week. Options are:

8. When the day is selected, Press SET.
9. Press SET again to exit the Programming Mode.

When completed, the 7500E should return to the normal display. Trying to change the payroll mode while cards are stored will produce an E-49 Error and an All Cards Reset must be performed.