The 7500E can be configured for Monthly Payroll Mode. Only the total hours are calculated. Regular and Overtime hours are not separated. Also, the timecards cannot be used to cover more than one pay period. The front side of the card must be full within one pay period before the card can be used on the back for that same period. To set the Monthly Payroll Mode:
- Remove the top cover.
- Press and hold the FUNCTION button for 3 seconds.
- When the 7500E beeps, release the FUNCTION
- Press the FUNCTION button to move the Indicator Mark under MODE.
- Press CHANGE to select the Payroll Mode to 1 for Monthly.
- Press SET to save the change.
- Press the CHANGE to select the day of the month the pay period will start.
- Press SET to save the change.
- Press SET again to exit the Programming Mode.
When completed, the 7500E should return to the normal display. Trying to change the payroll mode while cards are stored will produce an E-49 Error and an All Cards Reset must be performed.
Comments
0 comments
Article is closed for comments.