The 7500E can be setup to deduct an amount of time from a worked shift. This amount could be considered the lunch break. To set the Auto Break Deduction:
- Remove the top cover.
- Press and hold the FUNCTION button for 3 seconds.
- When the 7500E beeps, release the FUNCTION
- Press FUNCTION to move the indicator mark under AUTO BREAK DEDUCTION.
- Press SET to change the Elapsed Time.
- Press CHANGE to change the hours ranging from 0 to 24.
- Press SET to save the change.
- Press CHANGE to change the minutes ranging from 0 to 59.
- Press SET to save the change.
- Press CHANGE to set the Break Deduction.
- Press CHANGE to select the Break Duration setting.
- Press SET to change the Break Duration.
- Press the CHANGE button to change the Break Duration ranging from 1 to 90.
- Press SET to save the change.
- Press SET again to exit the Programming Mode.
When completed, the 7500E should return to the normal display. The letter B is shown to indicate a break. Trying to change the Auto Break Deduction while cards are stored will produce an E-49 Error and an All Cards Reset must be performed.
Comments
0 comments
Article is closed for comments.