By default, the 6000E prints in 12-Hour format and minutes. This can be changed to print in 24-Hour format and hundredths. The unit does not print or track totals on the card.
- Remove the top cover.
- Press SELECT to choose the DATE/TIME button.
- Press the Right Arrow (
 ) or the Left Arrow ( ) to select the Hours indicator. This would be indecated by a dash under 12.
- Press the Plus button (
 ) or Minus button ( ) to change the hours format.
| 12 |
sets the unit to print 12-hour format and shows an A or P after the time. |
| 12 |
sets the unit to print 24-hour format and shows seconds with the time. |
- Press SET after the display shows the print format desired.
When completed, the face time will set itself to match the digital display on the top. The 6000E was discontinued. Service and support is still available while parts last. |
|
Comments
0 comments
Article is closed for comments.