How To Program The Signal Length On A DWA-S Sonachron Program Timer

The DWA-S Sonachron Program Timer must be programmed with the date, the time, security code and events for bell ringing or as a controller. As a signalling device, the duration of the signal length is global for all events. The default length is 5 seconds. To the signal length:

1. If a security code was set, enter the Security Code. The display should read SELECT FUNCTION.
   
   
2. Press SIGNAL LENGTH on the keypad. The display should show SIGNAL LENGTH 05.
   
   
3. Press FAST FWD or SLOW FWD to change the length.
   
   
4. Press RUN when the length is changed.

The DWA-S should return to the normal display. When scheduled events occur, the bells/horns will sound for the specified length. For further assistance, contact our Technical Support Department at 404-691-1064.