When installing and setting up the DWA-S Sonachron Timer, the Dip Switches must be configured. Dip Switch 1 is the time keeping frequency dip switch. If the DWA-S is gaining time, this dipswitch is in the off position. To correct the problem:
- Remove the left panel.
- Locate the 4 dip switches.
- Make sure the top dip switch is in the on position (toward the back of the unit.)
- Replace the left panel.
- Set the time on the DWA-S.
It is not required to disconnect the clock from power or the battery. For further assistance, contact our Technical Support Department at 404-691-1064.
Article is closed for comments.