The Adjustable Print Position allows the print position to be moved up closer to or back further away from the edge of the timecard or document. This is especially necessary if the print should be in a specific location on a document. This is also necessary if the print is being cut off or running off the edge of the timecard or document.
It is recommended to make a sample print on a blank sheet of paper before adjusting the print to better adjust the print.
|
To adjust the print position alignment: 1. Lay the unit on it's back to show the print position alignment lever. 2. Locate the print position alignment lever on the bottom of the time recorder. 3. Slide the print position lever up or back. |
|
Comments
0 comments
Article is closed for comments.