PayClock Version 6 is a major advancement of the PayClock Product Line to enhance the reliability, performance and ease of use with PayClock terminals. It has 10 standard rounding rules for rounding punch times:
Not Selected: Does not round. This is considered True Time Rounding.
|
1/10 Hour - 3 min. breakpoint: Rounds to the 6 min. interval with a 3-min. break point.
- Punches 8:00 to 8:02 rounds to 8:00.
- Punches 8:03 to 8:06 rounds to 8:06.
|
1/4 Hour - 3 min. breakpoint: Rounds to the 15 min. interval with a 3-min. break point.
- Punches 8:00 to 8:02 rounds to 8:00.
- Punches 8:03 to 8:15 rounds to 8:15.
|
1/4 Hour - 4 min. breakpoint: Rounds to the 15 min. interval with a 4-min. break point.
- Punches 8:00 to 8:03 rounds to 8:00.
- Punches 8:04 to 8:15 rounds to 8:15.
|
1/4 Hour - 5 min. breakpoint: Rounds to the 15 min. interval with a 5-min. break point.
- Punches 8:00 to 8:04 rounds to 8:00.
- Punches 8:05 to 8:15 rounds to 8:15.
|
1/4 Hour - 6 min. breakpoint: Rounds to the 15 min. interval with a 6-min. break point.
- Punches 8:00 to 8:05 rounds to 8:00.
- Punches 8:06 to 8:15 rounds to 8:15.
|
1/4 Hour - 7 min. breakpoint: Rounds to the 15 min. interval with a 7-min. break point.
- Punches 8:00 to 8:06 rounds to 8:00.
- Punches 8:07 to 8:15 rounds to 8:15.
|
1/4 Hour - 8 min. breakpoint: Rounds to the 15 min. interval with a 8-min. break point.
- Punches 8:00 to 8:07 rounds to 8:00.
- Punches 8:08 to 8:15 rounds to 8:15.
|
1/4 Hour - 9 min. breakpoint: Rounds to the 15 min. interval with a 9-min. break point.
- Punches 8:00 to 8:08 rounds to 8:00.
- Punches 8:09 to 8:15 rounds to 8:15.
|
1/4 Hour - 10 min. breakpoint: Rounds to the 15 min. interval with a 10-min. break point.
- Punches 8:00 to 8:09 rounds to 8:00.
- Punches 8:10 to 8:15 rounds to 8:15.
|
In PayClock, rounding rules round forward from the breakpoint for both in and out punches. Punches only round back if they occur before the breakpoint. For further setup assistance, contact our Technical Support Department at 404-691-1064.
Comments
0 comments
Article is closed for comments.