How To Set Up The 900E For Daylight Saving Time

Initially, the 900E must be set for Daylight Saving Time. The unit will automatically determine the dates for the next year:

1. Remove the top cover.
2. Press SELECT. If a password is set on the unit, the time recorder will display 99 99.
3. Enter the password. The password is required to access the settings. If it is unknown, the time recorder must be reset. To enter the password:
   
   • Press CHANGE to enter the first two numbers of the password.
   • Press SET.
   • Press CHANGE to enter the second two numbers of the password.
   • Press SET
4. Press SELECT until the Indicator is over S.T. START.
5. Press CHANGE to set the Year and press SET.
6. Press CHANGE to set the Month and press SET.
7. Press CHANGE to set the Day and press SET.
8. Press SET
9. Press SELECT and enter the password again.
10. Press SELECT until the Indicator is over S.T. END.
11. Press CHANGE to set the Year and press SET.
12. Press CHANGE to set the Month and press SET.
13. Press CHANGE to set the Day and press SET.
14. Press SET

The 900E should return to the normal display.