Daylight Saving Time dates must be initially programmed into the 7000E. They must also be programmed in the event of the 7000E being reset. The 7000E will automatically set the dates for the next year. To program the Daylight Saving Time dates in the 7000E:
- Insert the key into the Top Cover and turn it 1/4 turn to unlock the cover.
- By holding the left and right sides, lift the Top Cover up.
- Press and hold the FUNCTION button for 3 seconds.
- When the 7000E beeps, release the FUNCTION
- Push the FUNCTION button and position the Indicator Mark next to DAYLIGHT SAVINGS.
- Push the CHANGE button to change the Year.
- Press SET to save the change.
- Push the CHANGE button to change the starting Month for Daylight Saving Time.
- Press SET to save the change.
- Push the CHANGE button to change the starting Day for Daylight Saving Time.
- Press SET to save the change.
After a few moments, the 7000E will flash at the Year again in order to set the ending date for Daylight Saving Time. - Push the CHANGE button to change the Year for Daylight Saving Time.
- Press SET to save the change.
- Push the CHANGE button to change the ending Month for Daylight Saving Time.
- Press SET to save the change.
- Push the CHANGE button to change the ending Day for Daylight Saving Time.
- Press SET to save the change.
- Press SET again to exit the Programming Mode.
Once the Daylight Saving Time settings are set initially, they wouldn't need to be set again, unless the 7000E is reset. Each year, the 7000E will use the settings from the previous year to determine the Daylight Saving Time settings.
Comments
0 comments
Article is closed for comments.