How To Set Up The 1500E For Daylight Saving Time

Configuring the Daylight Saving Time settings on the 1500E is essential for accurate time tracking and record keeping. The 1500E should automatically set the dates for the next year. To setup the Daylight Saving Time settings:

1. Insert the key into the Top Cover and turn it 1/4 turn to unlock the cover.
   
   The key is required in order to open the 1500E to access the programming.
2. By holding the left and right sides, lift the Top Cover up.
3. Press SELECT.
4. Enter the Password. The password is required to access the settings. If the password is unknown, the time recorder must be reset.
   
   To enter the password:
   • Press CHANGE to enter the first two numbers of the password.
   • Press SET.
   • Press CHANGE to enter the second two numbers of the password.
   • Press SET
5. Press SELECT until the Indicator Mark is over S.T. START.
6. Press CHANGE to set the Year for when Daylight Saving Time starts.
7. Press SET to save the change.
8. Press CHANGE to set the Month for when Daylight Saving Time starts.
9. Press SET to save the change.
10. Press CHANGE to set the Day for when Daylight Saving Time starts.
11. Press SET to save the change.
12. Press SET again to confirm the settings.
13. Press SELECT.
14. Enter the Password.
15. Press SELECT until the Indicator Mark is over S.T. END.
16. Press CHANGE to set the Year for when Daylight Saving Time ends.
17. Press SET to save the change.
18. Press CHANGE to set the Month for when Daylight Saving Time ends.
19. Press SET to save the change.
20. Press CHANGE to set the Day for when Daylight Saving Time started.
21. Press SET to save the change.
22. Press SET again to confirm the settings.

Once the Daylight Saving Time settings are set, the 1500E will automatically update the dates for the next year. Each year, the 1500E will use the settings from the previous year to determine the Daylight Saving Time settings.